Galaxy PA6S | One-Piece Personal PA System w/Powered Monitor

Click to enlarge

Features:

· 2-Way Speaker System
· 6.5" Neodymium Woofer
· 1.5" Titanium Dome Tweeter
· 170 Watt Amplifier
· 3 Inputs (2-XLR/1/4" Combos, One 1/8")
· Mounts to Any Mic Stand
· Built In Compressor/Limiter
· XLR Pass Thru On Channels 1 & 2

Details:

• The new design of the PA6S includes the convenient mic stand insert on the bottom of the unit. This allows a quick setup on top of a mic stand, with the PA6S angled upward for accurate vocal monitoring.
• The included mic stand adaptor insures a more stable and secure placement on any mic stand.
• Molded-in yoke bracket points. With the optional yoke bracket assembly the PA6S can be mounted to a wall or ceiling, or attached to a mic stand and angled in any direction.
• Microphone boom mount on top of the PA6S eliminates the need for a second mic stand for your
  microphone. (Requires optional hardware).
• Integrated handle into the top of the enclosure.
• Built in Compressor/Limiter prevents output distortion.
• -20dB pad switches on each XLR input allow high-level signals without distortion.
• 3 band EQ (High, Mid, Low) to adjust the sound to what you want to hear.
• Pass through on each channel acts as a built in splitter to send signals to a mixer snake or another PA6S.
• Two way speaker system: 6.5" neodymium high power woofer and 1.5" high efficiency Neolite tweeter allows for wider frequency response.
• 170 watt Class D amplifier.
• Lighter weight: Innovative speaker and amplifier designs actually allowed us to reduce the weight of the PA6S from its predecessors, while improving the performance.

Specifications:

SPEAKER SECTION
Woofer: One Galaxy Audio SW6.5 ferro fluid cooled 6.5" NEOLITE Neodymium Woofer
Tweeter: One ST1.5 fluid cooled 1.5" NEOLITE Neodymium Titanium Dome Tweeter
Nominal impedance: 4 ohms
Power handling capacity: 155 watts

ENCLOSURE
Enclosure Materials: Fire retardant styrene
Color: Black
Dimensions: 7.75" x 11.75" x 6.75" (197 mm x 298 mm x 171 mm)
Net weight: 6.4 lbs. (2.9 kg)

AMPLIFIER SECTION
Rated Power: 170 watts @ 4 ohms, 180 watts Dymamic Power
Equalization: Three band center detent
Lo: ± 12 dB peak/dip at 200 Hz
Mid: ± 12 dB peak/dip at 2 kHz
Hi: ± 12 dB shelving at 10 kHz
Sensitivity (1 Watt @ 1 meter): 98 dB (1 kHz octave band)
Frequency response: 80 Hz–18 kHz
Maximum SPL @ clip: 118 dB
Total Harmonic Distortion: <0.5% @ 4 ohms
Input connections: Two 1/4" Balanced/Unbalanced Two XLR 24V Phantom PWR One 1/8" Stereo Line In
Output connections: Two XLR Thru Outputs One 1/4" Preamp Output
Indicator LEDs: POWER, CLIP & COMPRESSOR
Power Requirements; Domestic: 120 VAC 60Hz
Export: 230VAC 50Hz
Safeguards: Short circuit current limiting. Short circuit foldback limiting. Thermal short circuit protection