Pipe and Drape
We have a large selection of Uprights, Bases and Drape Supports as well as numerous fabrics with which we can custom manufacture your drape to any specification.
Fixed Uprights:
Uprights are available in all of the standard heights in 1 1/2" diameter pipe. These uprights are the industry standard because of their light weight and low cost. They feature a heavy duty .065 wall and are available in either Slip Fit or Screw In. Fixed uprights are available in the following sizes:
10Ft., 8 Ft., 6 Ft., and 3 Ft. in both Slip fit and Screw In.
Upright Extensions:
Upright Extensions are an inexpensive way to increase the height of any fixed upright. An extension simply slips into the top of any fixed upright to provide additional height. They will work with either Slip Fit or Screw In Uprights and are available in the following sizes:
2 Ft., 4 Ft. and 6 Ft. Upright Extensions
Telescoping Uprights:
Button Lock Tele-Uprights feature a unique solid steel double button lock system that adjusts in precise 1 ft. increments. These uprights feature a double width keyway on the inside tube. With this feature you are able to slightly rotate the inner tube clockwise to bypass unwanted button stops and rotate it counter clockwise to lock the upright at the exact height you want.
6’ – 8’ Tele-Upright - Screw In or Slip Fit
8’ – 14’ Tele-Upright - Screw In or Slip Fit
10’ – 18’ Tele-Upright – Screw In or Slip Fit
Drape Supports:
The Drape Support is perhaps the most important component of a Pipe and Drape System. They must be rugged enough to stand up to repeated use, yet light enough to be easily handled. Telescoping Drape Supports feature the button lock system that allows the length of the drape support to be adjusted in precise increments. Sizes available are as follows:
3-5 Drape Support
4-7 Drape Support
6-10 Drape Support
7-12 Drape Support
8-14 Drape Support
10-18 Drape Support, button locks are not available on this product
Fixed Drape Support:
Fixed Length Drape Supports offer an economical alternative when every booth is the same size. Customs sizes are available upon request. Stock items are as follows:
8 Ft. Fixed Drape Support
10 Ft. Fixed Drape Support
The Screw In System:
The Screw In system utilizes a threaded steel nipple, riveted into the bottom of the Screw In Upright with 4 steel rivets. When the upright is screwed into the base they become one piece to ensure maximum stability. If storage space is important to you, consider the Screw In System. The Screw In Bases are manufactured out of 8 gauge steel and have two extruded holes, one in the center and one at the edge. The second hole is useful when setting Pipe & Drape adjacent to a wall.
The Slip Fit System:
The Slip Fit System is often the first choice of large trade show decorators and convention centers due to its ability to be set up quickly while providing excellent stability. This system uses a special nipple that is attached to the base in any of up to three mounting holes. Set up only requires placing a base on the floor and slipping an upright over the nipple. Most of the Slip Fit Bases feature a Stacking Slot allowing the bases to be stagger stacked to reduce storage space. Base Plates available:
Base Plates:
24” x 24” Heavy Duty Base (62 lbs.) slip fit only
24” X 24” Heavy Duty Base (31 lbs) slip fit and screw in
18" x 18" Heavy Duty Base (35 lbs) slip fit only
16” X 14” Base (10.5 lbs) slip fit only
15” X 15” Base (10.5 lbs) slip fit and screw in
11” X 11” Base (6 lbs) screw in only
8” X 14” Base (6 lbs) slip fit only
