|
|
X-3 | Gemini Amps
The X-series amplifiers are a one-time solution for DJs & Club owners. Built strong with a superior cooling & protection technology, they performwith excellence maintaining a quality signal from your mixer to your speakers, with balanced XLR inputs for that extra distance.
Features
- State-of-the-art bi-polar output stage technology for the finest sound quality and reliability
- High output power to drive professional loudspeakers without clipping
- Comprehensive protection circuitry: (Short Circuit, DC, Thermal Cut-off, Sub/Ultrasonic Frequency Filters, Turn-on Delay, Main Fuse, Secondary DC Fuses)
- Three modes of operation: stereo, parallel mono and mono bridge
- Ground lift switch for flexibility in installations
- Signal LED & Clip LED for better control
- Efficient dual aluminum extrusion heatsink design with directly mounted output transistors for no-fault operation
- Efficient air guide with front-to-rear airflow for thermal stability and reliability
- Compact 2U well balanced enclosure
- Steel reinforced chassis construction for durability and longevity
- 1/4” TRS & XLR balanced/unbalanced input connectors
Specifications
- Output Power EIA: 1kHz @ 1% THD, Wrms
- Both Channels Driven: @ 8 Ohms = 200 Watts, @ 4 Ohms = 300 Watts
- Mono Bridge: @ 8 Ohms = 600 Watts
- Dynamic Headroom: @ 8 Ohms = 1.6 dB, @ 4 Ohms = 2.2 dB
- Frequency Response: 30 Hz – 50 kHz
- Total Harmonic Distortion: Less Than 0.05%, Typical 0.02% @ 1 kHz
- Signal to Noise Ratio: 100 dB Below Rated Power @ 8 Ohms
- Damping Factor: Greater Than 200 @ 8 Ohms
- Slew Rate: 20 V/µS
- Voltage Gain: 32 dB
- Input Sensitivity (Rated Power @ 8 Ohms): 1 Vrms
- Input Impedance (Unbalanced): 10 kOhms
- Input Impedance (Balanced): 20 kOhms
- Power Consumption (Rated Power @ 4 Ohms, Both Channels Driven): 1200 VA
- AC Power Requirements: 110-120/220-240 Volts, 60/50 Hz.
- Indicators: 1 Signal LED per Channel, 1 Power LED, 1 Clip LED
- Cooling: Fan, Front-to-Rear Forced Air
- Protection: Short Circuit, DC, Thermal Cut-off, Sub/Ultrasonic Frequency Filters, Turn-on Delay, Main Fuse, Secondary DC Fuses
- Balanced/Unbalanced Inputs: XLR & 1/4" Jacks
- Speaker Outputs: 3-Way Binding Posts & 1/4" Jacks
|
