DFD Architectural DMX512 Console | PRE10-A

DFD Architectural DMX512 Console | PRE10-A

Product Code: PRE10-A
Availability: In Stock
Minimum Advertised Price: $602.00
Your Price: Click For Price
    - OR -   Add to Compare

The Preset 10 Architectural is a lighting control station capable of storing up to ten presets. These presets are recorded by capturing the output of a DMX512 console. Each preset can then be assigned as unique fade time, from 0 to 999 seconds. Presets are recalled by pressing one of the buttons.

Systems can be created by using one or more stations and a power supply. The solid aluminum faceplate is designed to install over a standard single gang electrical box. Connections to the Preset 10 Architectural are power (2 wires) and DMX512 (3 wires). Power for the Preset 10 can be supplied from a variety of sources, including a 10V class 2 "doorbell" transformer.

The Preset 10 Architectural system can work in conjunction with a lighting console, automatically switching between preset and console control. When the console generates DMX the Preset 10 Architectural goes off-line. The console then operates normally. Upon loss of DMX from the console, the Preset 10 Architectural either returns to its pervious preset or holds the last look (jumper selectable). Other options on loss of DMX, such as hold last look are possible.



Phoenix Contact MSTB series 5 position two part terminal block
Model: MSTB 2,5/5-ST-5,08 Order Number 17 57 04 8

Connector pin out:

1 - DMX512 common
2 - DMX512 data -
3 - DMX512 data +
4 - Negative supply
5 - Positive supply

Input/Output Circuit:

ESD protected EIA-485 transceiver (LT1785)


Ten green preset indicator LEDs
One red Lockout / Record LED

User Controls:

Ten preset push buttons
One recessed record push button
One recessed fade time push button

Option Jumpers: For a single station installation all jumpers should be installed.
JP1 Recording Enabled Recording Disabled
JP2 Master Slave
JP3 Architectural Mode Portable Mode
JP4 Single Station Mode Multi Station Mode
Power input:

9 to 24 volts DC or 6 to 16 volts AC / 200mA per station
(A 10 volt class 2 "doorbell" transformer is recommended for fixed installations)

Color: Black Anodized, With Silver Engraved Nomenclature
Size :

Face Plate: 4.5"h x 2.75"w x 0.2"d
Face Plate Rear Inset: 4.05"h x 2.4"w x 0.1"d
Electrical Box Minimum Inside Dimensions: 3.5"h x 2.1"w x 1.25"d

Copyright © 2019, Springtree Media Group, LLC. All rights reserved.
Springtree Media Group, LLC is not responsible for typographical errors.
Prices and specifications subject to change without notice.