DFD Preset Architectural Console | PRE10-A-POPO
Availability: In Stock
The Preset 10 Architectural is a DMX512 based architectural system capable of storing up to ten presets. These presets are recorded by capturing the output of a DMX512 console. Each preset can then be assigned a unique crossfade time, from 0 to 999 seconds. Presets are recalled by pressing one of the buttons.
There are two versions of software available PRE10A and PRE10A-POPO. The original PRE10A offers "Radio Button" operation. Where only one preset may be active at time. The new PRE10A-POPO offers ten HTP presets. Each of the ten presets are capable of being turned ON or OFF individually.
Phoenix Contact MSTB series 5 position two part terminal block
|Connector pin out:||
1 - DMX512 common
ESD protected EIA-485 transceiver (LT1785)
Ten green preset indicator LEDs
Ten preset push buttons
|Option jumpers:||For a single station installation all jumpers should be installed.|
9 to 24 volts DC or 10 to 16 volts AC / 200mA per station
|Color:||Black Anodized, With Silver Engraved Nomenclature|
Faceplate: 4.5"h x 2.75"w x 0.2"d