Aviom A-16R | 16-Channel Personal Mixer, Rack Mount
Availability: In Stock
The A-16R is a single-rack- space stereo digital mixer that can be added to any Pro16® network. Its versatile feature set makes it the ideal choice for a variety of applications on stage or in permanent installations.
the A-16R gives each performer control over channel volume, grouping, pan, stereo spread, and master volume and tone. Users can save and recall up to sixteen custom mixes as presets in their A-16R Personal Mixer.
For performers using wireless in-ear systems and powered floor wedges, the A-16R couples the mixing features of the A-16II Personal Mixer with additional connectivity options. Balanced outputs on the rear panel (with both XLR and 1/4" jacks) and stereo balanced insert points simplify audio connections to external processors, amps, or wireless transmitters. A front-panel headphone jack is also provided.
The rear-panel stereo Mix In jacks allow a local analog audio source, such as a click track or program material, to be added to the user's mix. A front-panel Mix In level control is also provided.
The A-16R can be remote controlled by adding the A-16CS Control Surface, allowing the A-16R to be rack mounted in an off-stage location with wireless in-ear monitor gear, amplifiers, etc. The A-16R can also be controlled via MIDI as well as RS-232 using approved third-party control systems.
Adding an ASI A-Net Systems Interface to a Pro64 network allows the A-16R to output any bank of 16 channels from the Pro64 network.
- Remote-controllable sixteen-channel stereo mixer with fully adjustable pan per channel
- Dedicated Recall, Group, Solo, and Mute buttons
- Sixteen user Preset memory locations
- Master Volume, Treble, and Bass controls
- Balanced XLR and 1/4-inch TRS stereo outputs
- Balanced 1/4-inch TRS inserts and stereo Aux mix input
- MIDI control over mix and preset save/recall
- Remote control via A-Control with the A-16CS or via RS-232 with approved third-party control systems
|Audio Outputs||Impedance matched output|
|Headphone Output||Front panel; TRS; Tip: Audio Left;
Ring: Audio Right; Sleeve: Ground
|Mix input, stereo||Balanced 1/4" TRS; front-panel volume control|
|Insert send/return||Balanced 1/4" TRS|
|A-Net I/O||1 A-Net In, 1 A-Net Out; RJ45 connectors|
|D/A Conversion||44.1/48kHz, 24 bit|
|Indicators||Pan: 5 LEDs, 4 red, 1 green;
Channel Volume: 12 red LEDs
|Stereo Operation||Stereo Link, per channel pair; set at the input module;
Variable pan/spread per channel or channel pair
|Tone Controls||Treble: ±12dB at 9kHz shelving
Bass: ±12dB at 160Hz shelving
|Output Impedance||140 ohms|
|Freq. Response||4Hz-22kHz +0.2dB/-3dB|
|Signal to Noise (unweighted)||-90dB typical, A/D to D/A
Measured from AN-16/i to A-16II
|Latency||<0.880 msec (measured from analog input to analog output)|
|Pro16 A-Net||uses unshielded Cat-5e UTP (or better) cable; maximum 500ft (150m) between device|
|Remote Control||A-16CS: A-Control, RJ45 jack, max. 200 ft. (60m)
Compatible with select third-party RS- 232 controllers
|External, DC, universal switching type
100-240 volts, 50/60Hz, 30VA
18-24 VDC, 0.5 amp
|Dimensions||19" (482.6 mm) x 6.7" (170.2 mm) , 1U high|
|Weight||3.4 lbs (1.54 kg)|
|Options||A-16CS Control Surface
MT-1 Mic Stand Bracket (for A- 16CS)
EB-1 Extension Bracket