Aviom AV-M8 | 8 Mic-Level Input Module

Aviom AV-M8 | 8 Mic-Level Input Module

Product Code: AV-M8
Availability: In Stock
MSRP: $1,075.00
Minimum Advertised Price: $850.00
Your Price: Click For Price
    - OR -   Add to Compare

The AV-M8 Mic Input Module provides eight mic-level inputs to a Pro16® system. Two channels also include a 20dB switchable pad for use with line-level input sources. Eight channels of digital audio may also be input via ADAT®, from a second AV-M8 module. The unit may be mounted in a rack or to a table or podium, using the reversible mounting flanges or detachable rack ears.

The AV-M8 is compatible with all Pro16 Series products including Personal Mixers, A-Net distributors, and output modules.

Input Connections

Analog audio is input via eight latching 5.0mm Euroblock connectors. Each analog input channel features configuration DIP switches for individually selectable gain settings, +48V phantom power, and low cut filter.

Analog input channels are routed to Channels 1-8 in the A-Net® stream, while channels input via the ADAT link become A-Net Channels 9-16. Stereo linking for all eight A-Net channel pairs is supported through an eight-position rear-panel DIP switch.

Network Connections

A-Net connections include A-Net Out and A-Net Expansion, using locking Neutrik EtherCon connectors. The A-Net Expansion jack allows up to 32 channels to be carried on a single Cat-5e cable, in either 32x0 or 16x16 configurations. Larger systems (up to 64 channels on a cable) can be built using Aviom's AN-16SBR System Bridge. Pro16 A-Net supports Cat-5e cable runs up to 500ft/150m between devices. For installations requiring longer cable runs, single- or multi-mode fiber optics may be utilized, using certain standard third- party media converters.

Features:

  • Converts eight analog audio channels to a Pro16® A-Net digital stream
  • ADAT® In and ADAT Out for cascading two AV-M8 modules
  • Gain, +48V phantom power, and low cut filter controls per channel
  • 20dB switchable pad (Channels 1 and 2)
  • Stereo Link per channel pair
  • Reversible mounting flanges and rack ears

Specifications:

Analog Audio Inputs: 6 mic-level, 2 balanced line- or mic-level
8 female Euroblock connectors, 5.0mm, panel-mount
Screw terminals: Audio +; Audio -; Ground
8 male Euroblock connectors supplied in box
A/D Conversion: 48kHz, 24-bit
Gain Settings: +16dB to +64dB (10 settings)
6-position DIP switch, per channel
Max. Input Level: Mic: -2dBu; Line: +18dBu
Stereo Operation: Stereo Link, per channel pair;
Two-position switch (Normal, Link)
ADAT®: 1 ADAT In, 48kHz, 8 channels routed to A- Net Out, Channels 9-16
1 ADAT Out, 48kHz, 8 channels routed from analog inputs
Input Impedance: Channels 1-2, without pad: 2.48k ohms
Channels 1-2, with pad: 5.63 ohms
Channels 3-8: 2.68k ohms
Freq. Response: 4Hz-22kHz +0.2dB/- 3db
THD +N: < 0.003%
Crosstalk: -90dB
Signal to Noise:
(unweighted)
A/D: -105dB
Low Cut Filter: - 3dB @ 85Hz, -18dB per octave
Phantom Power: +48 volts, per channel
Pad: 20dB, switchable, Channels 1 and 2 only
Mic Input : EIN (Equivalent Input Noise): -128dBu
(Rs = 150 ohms, 20kHz BW, Gain = +60dB)
CMRR (Common Mode Rejection Ratio): 80dB @ 120Hz (Gain = +60dB)
Bit Error Rate (BER): 10-12
Pro16® A-Net®: Out: 1; Expansion: 1; EtherCon® connectors
A-Net Expansion combines two A-Net streams (32 channels of audio) onto one Cat-5e cable
Uses unshielded Cat-5e UTP (or better) cable
Latency: <0.880 msec (measured from analog input to analog output)
Power Supply: Internal, universal switching type; IEC jack
Voltage: 100-240VAC, 50-60Hz, 60W; Fuse: 250VAC, F4AL

Dimensions:

19 in. (482.6 mm) wide x 9.25 in. (243.9 mm) deep; 1U high
Weight: 8 lbs (3.63 kg)
Copyright © 2019, Springtree Media Group, LLC. All rights reserved.
Springtree Media Group, LLC is not responsible for typographical errors.
Prices and specifications subject to change without notice.