The DMX to AMX Converter is available in one AMX output from a single DMX input. Custom units with any number of DMX inputs and AMX outputs are also available. These custom units are seamless; they handle the problems of two DMX inputs covering one AMX output and CD-80 6K/12K modules without gaps in the DMX numbering.
DMX to analog converters produce analog control signals from the DMX512 levels. Doug Fleenor Design’s analog signals meet the ANSI E1.3 standard (0 to 10V Analog Control Specification). Analog signals from these converters are typically used to control analog (0-10V) dimmers, LED indicators, fog machines, and anything else that has a 0-10V analog control input.
DMX to AMX converters allow control of dimming systems based on the AMX192 control standard via DMX512. Doug Fleenor Design’s converters are very fast and very reliable for demanding applications. Conversion to/from Colortran’s CMX protocol is accomplished using our DMX merge products. Units with any number of DMX512 inputs and AMX192 outputs can be manufactured on a per order basis.
Available connector types: 5 pin XLR, 3 pin XLR, RJ-45 (ESTA or Color Kinetics pinout), or mounted in a JBOX enclosure.
Input signal: | 250 Kilobaud (CMX’s 153.6 Kilobaud is optional) 0.2 volts minimum, 12 volts maximum |
Input circuit: | EIA-485 receiver with 22 K-Ohm pull up on +Data
22 K-Ohm pull down on -Data |
Input connector: | Gold plated 5 pin male (Neutrik D-1 series) |
Input pass through: | Gold plated 5 pin female (Neutrik D-1 series) All five pins are passed through |
Output signal: |
Data clock: 8 uS (micro seconds) Reset clock: 50 uS followed by 15 uS delay Frame rate: 60 uS period. Analog data precedes rising edge of clock by 10 uS Analog level: 0 to 5.3 volts |
Output circuit: | Clock: EIA-485 driver Analog data: NPN active pull up, 200 ohm passive pull down, 24 ohm series resistor |
Output connector(s): | Gold plated 4 pin male (Neutrik D-1 series) |
Output Pinout: | Pin Function 1 COMMON 2 CLOCK+ 3 ANALOG DATA 4 CLOCK- |
Power input: | 100 – 120 volts, 50/60 hertz, 12 watts (208 – 240 volt optional) |
Color: | Black front, back, top, and sides. Clear iridite aluminum bottom. |
Size and weight: | 9″ deep, 1.6″ high, 5.6″ wide, 2.5 pounds (19″ rack adapter available) |
Reviews
There are no reviews yet.