What It Can Power
The 24-volt DMX1200 can power up to (32) 30watt Spatial Flats, (16) 50watt Spatial Flats, or (80) LEDBoard12 LED Modules, all on a single 20 AMP circuit.
- Low voltage (24V) LED module control
- 8 Zones, 150w each (120w recommended)
- White and RGBW modes
- Local control
- Color macros
- AC input: 120V
- DC output: 150w per connector, 1200w total
- Environmental Temp: -4 deg F – 140 deg F
- Weight: 20 lbs
- Dimensions: 19” x 14.5” x 3.5”
Which Power Driver Is Right For You?
The DMX1200 has the distinction of being the only rack-mountable Lo-Vo Power Driver.
The DMX1800 and the DMX1200 give you more flexibility over control to split your channels into different zones depending on your needs. The DMX600 is more limited in its control options. You can divide your DMX600’s channels into four zones when using Warm White fixtures, but all four channels must be a single zone when using color LEDs.
The DMX1800 does not come with a plug. It gives you the option to hardwire the unit if desired. (View DMX1800 manual for more info.) The DMX600 & DMX1200 include a plug and power cord for plugging into a standard wall outlet. (Be sure the power outlet matches the required voltage for your unit).
|30Watt Spatial Flats||16||32||48|
|50Watt Spatial Flats||8||16||24|
|12Watt LED Board||40||80||120|